Dear adhesives User: Hello! Our professional agents wholesale sales Henkel Loctite glue, selling products, due to the low expenses of our staff, management, refined, low management fees, the cost of the product down to low. So, I absolutely lowest sales to peer Henkel Loctite glue, welcome to inquire, the company hotline 0769 -8535-7789 Sales Hotline :189-2826-8345 the Miss Zhu Loctite 638 glue-selling Wenzhou (Xiao Shan loctite638), retaining compounds Loctite Loctite 638 cylindrical retaining compound - the holding of the highest strength of the high strength plastic, for a dynamic load or cyclical load case, the holding with the gap of 0.23mm shaft hole with. Early cured within 5 minutes. For bonding cylindrical parts, especially for the adhesive gap is approximately 0.25mm member and requirements under ambient conditions having a maximum intensity of the occasion. Color: green filled radial clearance (mm): 0.381 of Viscosity (, MPa.s): 2000/3000 Shear strength steel / steel (psi): 3625 curing speed (initial solid / finished solid): 5 minutes / 24 hours Recommended accelerator: 7471/7649 specific gravity: 1.09 Loctite solid holding plastic retaining glue fill the space between the parts of the internal and cured to become a strong and precise fit, which has been widely accepted as a standard method for mounting a press-fit and planning with the parts. 603 has oil tolerant and general-purpose, high strength retention and sealed cylindrical parts, maximum fill radial clearance of 0.13mm. 609 low viscosity, high strength, suitable for the excessive interference or clearance fit, retention key with the shaft, the bearing, the small motor rotor shaft, the bush. 620 high-temperature, high-viscosity, high strength, and not flowing. 641 in strength, easy to disassemble for retaining cylindrical assemblies for occasions that require frequent disassembly suitable bearing assembly. 648 high strength / fast curing, for continuous working temperature of 175 ° C is recommended. 680 high strength, medium viscosity for clearance or transition with the retaining sleeve, pulley, rotor.